After using 70mm spur gear motor wholesale for a certain period of time, various problems may occur. If the vibration of 70mm spur gear motor wholesale is too large, we generally start from many aspects. 70mm spur gear motor wholesale base vibration caused by excessive wear, motor excessive wear, transmission mechanism imbalance and rotor mechanical balance, the following to give you a simple analysis.

1, 70mm spur gear motor wholesale bearing wear is too large

Bearing working time is long, bearing clearance is too large or unbalanced, resulting in bearing friction heating, the most afraid of rotor and stator friction, direct damage to the bearing. Plain bearings are the most prone to vibration, because it has the viscosity of lubricating oil, the shaft will float, which can also be related to the bearing weight. The greater the bearing weight, the faster the wear.

2, 70mm spur gear motor wholesale machine stand vibration

In some cases, excessive vibration of the frame will also have an impact, and the vibration frequency of the frame can be said to be the speed of the gear reducer, which may cause problems with the frame design, resulting in operation.

3. The 70mm spur gear motor wholesale is out of whack

When the calibration line of the motor and the driver in the gear reducer is not good and easy to produce vibration, it is necessary to adjust the calibration line and reinstall the connection between the reducer motor driver and the motor to stabilize the rotation of the motor bearing.

70mm spur gear motor wholesale https://www.dydzmotor.com/spur-gearbox